What tools are necessary to disassemble an iPhone 6?
How to Take Apart an iPhone 6: A Step-by-Step Guide
The iPhone 6 is a great smartphone with impressive features that have made it a popular choice among tech enthusiasts. But, what happens when you need to fix an issue that requires taking it apart? In this article, we’ll guide you on how to disassemble your iPhone 6 by providing a comprehensive step-by-step guide.
Tools Required
Before we start disassembling, we need to have the right tools. These include:
• Pentalobe screwdriver (0.8mm)
• Phillips screwdriver (optional)
• Suction cup
• Plastic pry tool
• Tweezers
Step 1: Power Off Your iPhone 6
Before you start to take your iPhone 6 apart, it’s important to power it down. To do this, press and hold the power button on the side of the phone until you see the “slide to power off” option. Slide the red bar to the right to power off your iPhone.
Step 2: Remove the Pentalobe Screws
With your Pentalobe screwdriver, remove the two screws located at the bottom of the iPhone 6 on either side of the charging port.
Step 3: Loosen the Screen
Take your suction cup and place it on the lower left-hand corner of the screen. Pull up on the suction cup to create a gap between the screen and body of the phone. Repeat this process on the lower right-hand corner.
Step 4: Use the Plastic Pry Tool
Take your plastic pry tool and slide it between the gap you created in step 3. Gently start to separate the screen from the body of the phone. Work your way around the screen with the pry tool, ensuring not to insert it too deeply into the phone.
Step 5: Unplug the Battery
With your Phillips screwdriver (optional), remove the two screws holding the battery connector in place. Next, take your plastic pry tool and gently lift the battery connector up to disconnect it.
Step 6: Remove the Shielding Plates
Using your Phillips screwdriver, remove the four screws holding the top shield plate in place. Repeat this process for the bottom shield plate, which also has four screws. Lift the plates out of the phone once the screws are removed.
Step 7: Disconnect Cables
With your plastic pry tool, gently lift the three cables out of their sockets. Be careful not to damage the cables while doing this. Once disconnected, the screen can be removed from the iPhone 6.
Congratulations! You’ve successfully disassembled your iPhone 6. Now you can replace the faulty parts or perform any necessary repairs. Remember to follow this guide in reverse order when assembling your iPhone 6 back together.
Conclusion
Taking apart an iPhone 6 may seem daunting, but with the right tools and a step-by-step guide, it isn’t difficult. Remember to be patient and careful when carrying out the process to avoid any damages. If you have any doubts, seek the help of a professional. Happy fixing!
Many iPhone owners find themselves in a situation where they need to disassemble their device in order to make repairs or modifications. While taking apart an iPhone 6 may seem intimidating, it is far from impossible. With just a few tools and the right steps, anyone can easily take apart their iPhone 6.
Before starting, gather the tools you will need. You will need a suction cup, a Phillips head screwdriver, a flat-head screwdriver, and if you purchased an iPhone 6s or iPhone 6s Plus, you will also need a pentalobe screwdriver. After gathering these tools, locate the edge of the case near the home button and place the suction cup over the case. Apply firm pressure and lift the case up to separate it from the phone’s body. Once the case is removed, you will be exposed to all of the internal components.
At this point, you will need to remove the motherboard, which is found behind four Phillips head screws. Unscrew the screws and carefully remove the motherboard. If the phone is an iPhone 6s or 6s Plus, you will also need to remove two pentalobe screws that secure the connectors for the Touch ID sensor. After the screws have been taken out, the motherboard can be slid out of its housing.
Next, you will need to carefully lift up the logic board and remove the battery. This can be done by using a flat-head screwdriver to loosen the adhesive securing the battery. Carefully lift the battery up and out of its housing.
Once the battery is removed, the display and digitizer can be taken out of the phone. Locate the three Phillips head screws on the front of the LCD plate and unscrew them. Once unscrewed, carefully disconnect the LCD plate from the mid frame. If desired, the LCD and digitizer can then be completely separated.
At this point, you are almost done taking apart your iPhone 6. If needed, any of the hinging components can be taken out of the phone and replaced, including the vibration motor, speakers, microphones, etc. To completely reassemble the phone, simply repeat these steps in reverse.
Taking apart an iPhone 6 may seem intimidating, but with a few tools and the proper steps, the process is surprisingly easy. Follow these steps and you will have no problem making repairs or modifications to your iPhone 6.