How to Repair Trex Decking

Trex decking is a popular choice for outdoor spaces due to its durability, low maintenance and eco-friendly properties. However, like any other decking material, it can be damaged by weather, foot traffic and other factors. In this article, we will provide step-by-step instructions on how to repair Trex decking.

Materials Needed

• Bucket
• Warm water
• Mild detergent
• Soft bristle brush
• Sandpaper (80 grit and 100 grit)
• Trex composite decking patch kit
• Putty knife
• Paintbrush
• Plastic wrap
• Heavy object (such as a brick)
• Decking board (if replacement is needed)
• Drill and screws (if replacement is needed)

Step-by-Step instructions

Cleaning the damaged area

1. Mix warm water and mild detergent in a bucket
2. Dip the soft bristle brush in the solution and scrub the damaged area
3. Rinse the area with clean water and let it dry completely

Repairing small scratches and gouges

1. Prepare the Trex composite decking patch kit according to the instructions
2. Apply the patch to the damaged area with a putty knife and smooth it out evenly
3. Cover the patch with plastic wrap and place a heavy object (such as a brick) on top to keep it in place while it dries
4. Let the patch dry completely (usually 24-48 hours) before removing the plastic wrap and heavy object

Replacing a damaged decking board

1. Remove the damaged decking board by unscrewing it from the support beams
2. If the board is attached with hidden fasteners, use a deck board removal tool to pry it up
3. Measure the length of the gap left by the removed board
4. Cut a new decking board to the measured length
5. Drill holes for screws on the new decking board
6. Attach the new board to the support beams with screws

Conclusion

Repairing Trex decking can be done with a few simple materials and some basic DIY skills. By following these step-by-step instructions, you can restore your Trex decking to its original condition and enjoy your outdoor space for years to come.