What types of liquids should I avoid allowing to enter the top iPhone speaker?
How to Get Water Out of Top iPhone Speaker
Accidents happen, and one of the most common is to drop your iPhone in water or any other liquid. While it can be a cause of panic, it is essential to take immediate action to prevent irreversible damage to your phone. One of the most common places where water can enter your iPhone is the speaker at the top. Often we overlook this spot, but when it comes in contact with water, it can cause many problems with the functionality of your phone.
If you are someone who likes to listen to music or make calls with loudspeakers, having water in the speaker can cause a muffled or distorted sound. Don’t worry, though, there are some easy ways you can get the water out of your iPhone’s top speaker.
Method 1: Rice
This method has been around for a while, and it’s still one of the most effective ways to get water out of an iPhone’s speaker.
- Step 1: Take a bowl and fill it with uncooked rice.
- Step 2: Remove your iPhone case, and switch off your device.
- Step 3: Cover the iPhone with rice in the bowl and let it settle for about 12-24 hours.
- Step 4: Remove the iPhone from the rice and switch it on to see if the speaker is working.
If your iPhone’s speaker is working fine, congratulations, you’ve successfully removed the water from your iPhone’s speaker! Repeat the process if required.
Method 2: Vacuum Cleaner
If the rice method doesn’t work, try using a vacuum cleaner. Here’s how to go about it:
- Step 1: Remove the case and switch off your iPhone.
- Step 2: Cover the top speaker with a small piece of cloth.
- Step 3: Set your vacuum cleaner to a low power mode, and hold it over the speaker.
- Step 4: Turn on the vacuum cleaner for a few seconds.
- Step 5: Turn on your iPhone to check if the speaker is working again.
It’s essential to note that using a vacuum cleaner over long periods can damage the speaker. Therefore, it’s recommended that you try this method for a few seconds first.
Method 3: Sound
This may seem like the most straightforward method, but it’s also one of the most effective.
- Step 1: Turn on the speaker function on your iPhone.
- Step 2: Play loud music or any sound on your device for about one minute.
- Step 3: After a minute, check the speaker to see if the water has cleared away.
This method uses sound vibrations to remove the water. If it doesn’t work the first time, repeat the process.
Conclusion
There is no one perfect way to remove water from an iPhone’s speaker. However, these three methods are a pretty effective way to get the job done. If none of these methods work, seek professional help to prevent permanent damage to your iPhone’s speaker.
Remember, the key is to act fast!
If you’re dealing with water getting trapped in your iPhone’s top speaker, there are a few things you can do to get the water out. This can be a common problem for many iPhone users, but luckily, there are some simple steps you can take to address it.
First and foremost, make sure the phone is fully turned off. This will prevent any potential electric shock if you attempt to remove the water. With the phone powered down, grab some tissue or a cloth and lightly dab the speaker. Doing this will help move the water around and free any trapped air.
If the water is still present in the speaker, it’s likely it’s collecting in the creases and corners. To get this water out, you’ll need to take a vacuum cleaner and use the smallest nozzle attachment. Place the nozzle over the speaker ports and turn the vacuum on to a medium power. This will draw out the water from the speaker.
Once all the water has been removed, cover the speaker with a dry cloth and turn the vacuum off. Let the cloth remain in place for 15-20 minutes to help absorb any residual moisture. Afterwards, you should power up the iPhone to make sure the speaker is functioning properly.
In the event these steps don’t work, you may need to take the phone to a repair shop to have the water professionally extracted. Most shops will have specialised machines to dry the internals and replace any faulty parts.
By following these steps, you can effectively remove water from your iPhone’s top speaker and get it sounding as good as new.