how to change the battery on an iphone 5s

iPhone 5s

Are there any risks of turning off the device when changing an iPhone 5s battery?

How to Change the Battery on an iPhone 5s

If you’re an iPhone 5s owner, you may have noticed that your phone battery isn’t lasting as long as it used to. Luckily, replacing the battery is a relatively simple process that can be done at home with the right tools. Here’s how to change the battery on an iPhone 5s.

Tools you’ll need:

  • New iPhone 5s battery
  • Pentalobe screwdriver
  • Phillips screwdriver
  • Spudger tool
  • Suction cup

Step 1: Power off your iPhone 5s

Before you begin the battery replacement process, make sure your iPhone 5s is turned off so you don’t damage any internal components.

Step 2: Remove the bottom screws

Use the pentalobe screwdriver to remove the two screws located at the bottom of your iPhone 5s.

bottom screws

Step 3: Lift the display

Use the suction cup to lift the display away from the iPhone 5s chassis. Be careful not to pull too hard or you may damage the display cables.

lift display

Step 4: Remove the battery connector

Use the Phillips screwdriver to remove the two screws holding the battery connector in place. Use the spudger tool to gently disconnect the battery connector from the logic board.

battery connector

Step 5: Remove the adhesive strip

Use the spudger tool to gently lift the adhesive strip that’s holding the battery in place. Slowly pull the adhesive strip away from the iPhone 5s chassis until the battery is loose.

adhesive strip

Step 6: Install the new battery

Carefully install the new battery in the iPhone 5s, making sure it’s securely in place.

Step 7: Reconnect the battery connector

Use the spudger tool to reconnect the battery connector to the logic board. Use the Phillips screwdriver to secure the battery connector in place with the two screws.

Step 8: Reattach the display

Carefully reattach the display to the iPhone 5s chassis, making sure the cables are snugly connected. Use the pentalobe screwdriver to replace the two screws at the bottom of the phone.

Step 9: Power on your iPhone 5s

Press and hold the power button to turn on your iPhone 5s. Your phone should now have a new battery!

By following these steps, you can easily change the battery on your iPhone 5s and extend your phone’s lifespan.

The Apple iPhone 5s was released in 2013 and remains a popular phone today. Over time, however, the battery may need to be replaced. If you are unsure how to do this for yourself, here are some easy steps to help you get it done.

First, you will need to acquire the correct tool and a compatible battery. You can purchase an iPhone 5s battery repair kit from an electronics store, or online. Make sure the battery is compatible with the iPhone 5s.

Once you have the tool and battery, turn the phone off and remove the two screws located on the bottom of the phone. Fit the special tool to the notch at the bottom of the phone and slowly push it upward until you can slide the back casing off the phone.

Using the heat-resistant sticky mat (included in the kit), lay it out on a smooth surface. Place all of the screws and the removed plastic casing onto the mat and set aside.

Now, locate the battery connector near the top of the phone and disconnect it using your repair tool. Gently lift the battery off of the phone and replace it with the new battery in the same position. Reconnect the battery and securely fasten it to the phone.

Replace the two bottom screws and the back casing. Make sure everything is securely fastened.

Finally, charge your phone for at least an hour before turning it back on. The new battery should be fully functional now.

If you have any questions about the process or need additional help, you can always take your iPhone 5s to a service center for assistance. It is generally recommended that any such work is done by an authorized Apple professional.

Leave a Comment