do it yourself garage floor concrete resurface

Do-it-yourself (DIY) garage floor concrete resurfacing is a great way to update the look and feel of your garage. It’s an easy project that can be completed in just a few days and with minimal cost. This project involves removing any existing paint or sealer, cleaning the surface, and then applying a new epoxy coating or sealer to give your garage floor a fresh new look. With a little effort and the right materials, you can have a professional looking garage floor in no time at all!If you are looking to give your garage floor a new lease of life, then resurfacing with concrete is an ideal option. You can easily achieve a professional look with minimal effort and cost. Here is a step-by-step guide on how to resurface your garage floor with concrete:

1. Prepare Your Garage: First, you will need to thoroughly clean the existing surface to ensure there is no dirt, dust or debris that can interfere with the resurfacing process. You may also need to repair any cracks or holes in the floor before proceeding.

2. Apply Primer: Once you have prepped the area, it is important to apply a primer coat of concrete over the surface in order to help bond the new layer of concrete more effectively. Allow this layer to dry completely before moving on.

3. Mix and Apply Resurfacer: Now it’s time for the resurfacer mix! Follow the instructions on the packaging and mix up enough material for your project. It’s best to use a trowel or squeegee when applying this material to ensure an even layer across the entire surface.

4. Level Out High Spots: Once you have applied all of your resurfacer mix, you will need to level out any high spots using a float or trowel, as well as remove any excess material from low spots using a brush or broom.

5. Allow Time To Cure: The final step is allowing your resurfaced floor time to cure properly before walking on it or adding any furniture back into the garage space. Depending on temperature and humidity levels, this could take anywhere from 24-48 hours, so be sure not to rush this step!

DIY Garage Floor Concrete Resurfacing

Resurfacing your garage floor with a concrete overlay can be a great way to update the look of your garage and add value to your home. But before you start your project, it’s important to make sure you have all the materials and tools you need for the job. Here’s what you’ll need for DIY garage floor concrete resurfacing:

Concrete Patching

Before applying the new overlay, it’s important to ensure that any existing cracks or damage in the concrete are patched up with a quality concrete patching material. This will help ensure that the resurfaced surface is even and durable.

Concrete Resurfacing Overlay

Once the patching is complete, it’s time to apply the concrete resurfacing overlay. This product is designed specifically for resurfacing concrete surfaces and is available in a variety of colors and finishes for added customization options.

Paint Roller or Squeegee

To apply the resurfacing overlay, you will need either a paint roller or a squeegee. The type of tool you choose will depend on your preference as well as how large an area you are resurfacing.

Mixing Paddle

You will also need a mixing paddle for mixing up batches of cement or overlay material. This tool attaches to an electric drill and helps ensure that ingredients are blended evenly.

Broom or Brush

A broom or brush can be used to sweep away debris before applying the overlay material. It can also be used during cleanup after application.

Protective Gear

When working with cement-based materials, it’s important to wear protective gear such as gloves, eye protection, and a dust mask. These items will help protect you from dust and debris while working on your project.

Preparing the Garage Floor for Resurfacing

Preparing the garage floor for resurfacing is an important part of ensuring a long-lasting and durable finish. Taking the time to properly prepare your garage floor before beginning resurfacing will help ensure that your floor will look great and last for years to come. Here are some tips on how to prepare your garage floor for resurfacing.

First, remove any debris that may be on the garage floor. This includes dirt, oil, grease, paint chips, and any other materials that may be present. Cleaning the surface thoroughly with a degreaser or detergent will help ensure that all of these materials are removed. This will also make it easier to apply the resurfacing product when you’re ready.

Second, use a diamond grinder or shot blaster to grind down any bumps or uneven areas on the concrete surface. This will create a smoother surface for applying the coating. If there are large cracks in the concrete, these should be filled before beginning resurfacing.

Third, apply a penetrating sealer to protect against moisture and staining. This is especially important if you live in an area with high humidity levels or if you plan on using harsh chemicals in your garage in the future.

Finally, make sure that you have all of the necessary tools and materials on hand before beginning work on your project. Having everything ready ahead of time can save you time and money in the long run. It’s also a good idea to test out any products before applying them to your garage floor.

By following these steps when preparing your garage floor for resurfacing, you can ensure a successful project that looks great and lasts for years to come!

Applying the New Garage Floor Concrete Resurfacing

The garage floor is one of the most important parts of a home, and one that often gets overlooked. If you’re looking to spruce up your garage, consider applying a new concrete resurfacing product. This will give your garage a fresh look and make it easier to clean and maintain. The process is quite simple and can be completed in just a few hours. Here are some tips for applying the new garage floor concrete resurfacing:

First, you’ll need to make sure the surface is clean and free of debris. Use a pressure washer or scrub brush to remove any dirt or grime from the surface. Once it’s clean, let it dry completely before beginning the resurfacing process.

Next, you’ll need to prepare the surface for application. Depending on the type of product you’re using, you may need to use an etching solution or primer before applying the resurfacing material. This will help ensure that the product adheres properly and lasts as long as possible.

Once everything is ready, it’s time to apply the product. Most products come with detailed instructions on how to apply them correctly. It’s important to follow these instructions carefully in order to achieve optimal results. Make sure you wear proper safety equipment when handling any chemicals involved in this process.

Finally, once everything has been applied, let it dry completely before using your newly resurfaced garage floor! With proper care and maintenance, your new garage floor should last for years to come.

Sealing Your DIY Garage Floor

Sealing your DIY garage floor is an inexpensive way to protect and enhance its appearance. Using a quality concrete sealer will help protect your garage floor from oil and other spills, as well as prevent staining and make it easier to clean. Sealers also provide a glossy finish that will make your garage floor look more attractive. Before applying the sealer, be sure to clean the surface thoroughly and remove any dirt, debris, or stains. Once the surface is clean and dry, you can apply the sealer according to the manufacturer’s instructions.

Finishing Your DIY Garage Floor

Once your garage floor is sealed, you can finish it off with a decorative coating. There are a variety of finishes available including epoxy coatings, latex paints, and polyurethane finishes. Each type of finish has its own advantages and disadvantages so be sure to research each one before deciding on the best option for your project. A popular option is an epoxy coating which provides a durable finish that is easy to maintain. When applying a decorative coating, be sure to follow the manufacturer’s instructions closely in order to achieve a professional-looking result.

No matter which type of finish you choose for your DIY garage floor project, proper preparation and application are essential for long-lasting results. Be sure to take all necessary safety precautions when working with any type of sealer or paint product and always read the manufacturer’s instructions thoroughly before beginning any project. With some patience and attention to detail you can transform your garage floor into a beautiful work of art that will last for years!

Benefits of DIY Garage Floor Resurfacing

Doing a DIY project for your garage floor resurfacing is an effective way to spruce up your space and make it look like new. Not only will it improve the aesthetics of the area, but it can also protect your floor from damage caused by moisture, oil, and other debris. DIY garage floor resurfacing is relatively easy to do and requires minimal equipment and supplies. Here are some of the benefits of DIY garage floor resurfacing:


DIY garage floor resurfacing is much more affordable than hiring a professional to do it for you. It also eliminates the need for expensive materials as most DIY projects can be done with common materials found around the house or at a hardware store. This makes DIY projects much more cost-effective than hiring a professional.


One great benefit of doing a DIY project is that you have complete control over the design and finish of your garage floor. You can customize your project to match the existing décor in your space or create something completely unique for a one-of-a-kind look. Additionally, you can choose from a variety of materials such as tile, epoxy, paint, and polyurethane to get the exact look you want.

Easy Installation

DIY garage floor resurfacing is also very easy to install. Most projects require minimal tools and supplies and can be completed in just a few hours or less. This makes it ideal for those who don’t have much time on their hands or experience with home improvement projects.


In addition to enhancing the appearance of your space, resurfacing your garage floor will protect it from damage caused by moisture and chemicals spilled on its surface. Resurfacing will fill in any cracks or chips in the floor so that water won’t be able to seep in and cause further damage over time. It also adds an extra layer of protection against oil, dirt, and other debris that could otherwise cause permanent staining if left untreated.

Overall, DIY garage floor resurfacing is an easy way to improve the aesthetics of your space while also protecting it from damage caused by moisture and other debris. With minimal tools, supplies, and time required, this project has many benefits that make it worth considering for any homeowner looking for an easy upgrade to their garage space.

Not Preparing the Surface Properly

One of the most common mistakes when resurfacing a garage floor is not preparing the surface properly. This means that if you are resurfacing an existing concrete slab, you need to make sure that it is clean, free of dirt, dust and debris, and free of any sealers or coatings that may be present. If these steps are not taken, the new surface will not adhere properly and can lead to peeling or bubbling of the coating. It is also important to check for any cracks or damage in the existing slab as this can affect how well the new coating adheres.

Using an Incorrect Coating

Another mistake that is often made when resurfacing a garage floor is using an incorrect coating. Different coatings are designed for different applications and conditions. For example, if you are going to use your garage for heavy traffic such as cars or motorcycles, then you will need to use a more durable epoxy-based coating than if you were going to use it just for storage or light traffic. It is important to understand what type of coating would best suit your needs before beginning any project.

Not Cleaning the Floor Thoroughly

If you do not thoroughly clean the garage floor before applying a new coating, then this can lead to problems down the road such as peeling or bubbling of the coating. Dirt, dust and debris can interfere with how well the new surface adheres so it is important to make sure that all these contaminants are removed before beginning your project. This includes sweeping, vacuuming and mopping up any spills that may have occurred on the floor.

Not Applying Enough Coating

When applying a new coating to your garage floor, it is important to make sure that enough product is applied in order for it to adhere properly. If too little product is used then this can lead to problems such as peeling or bubbling later on down the road. Make sure that you read all instructions carefully so that you know how much product should be used in order for it to be successful.

Not Allowing Adequate Cure Time

Once your new surface has been applied it needs adequate time in order for it to cure properly. This means waiting at least 24 hours before using your garage again or parking vehicles inside of it. If this step isn’t taken then there could be problems with how well your new surface adheres which could lead to peeling or bubbling later on down the road.

Gather the Materials

Before starting any DIY project, it’s important to make sure you have all the necessary materials and tools. When it comes to resurfacing a garage floor, you’ll need an epoxy-based coating, a floor grinder or sander, sealer, and other related materials. You can find all of these items at your local home improvement store or online. It’s also a good idea to read up on the specific instructions for each product before purchasing them.

Prepare the Surface

Once you have all the necessary supplies, it’s time to prep the surface. This involves cleaning off any dirt or debris that may be on the floor as well as removing any old paint or sealant. You may need to use a power washer for this step and make sure to give the floor plenty of time to dry before moving onto the next step.

Grind and Sand

This is where things get a bit more intense! Use either a floor grinder or sander to grind down any uneven surfaces and remove any imperfections in the concrete. Make sure you follow all safety precautions when using these tools and wear protective gear such as goggles and gloves. Be sure to move around in small circles when grinding so that you don’t miss any spots.

Apply Epoxy Coating

Once you’ve finished grinding and sanding, it’s time for the fun part – applying an epoxy-based coating! This is what will give your garage floor its beautiful finish and protect it from scratches, stains, and other damage. Make sure to follow all instructions carefully when applying this coating so that it sets properly.

Seal It Up

The last step in resurfacing your garage floor is sealing it up with a good sealant. This will help protect against moisture damage as well as provide an extra layer of protection from dirt and dust. Be sure to let it dry completely before walking on it or parking anything on top of it.

Following these tips should help ensure that your DIY garage floor resurfacing project goes smoothly! With just a little bit of patience, some elbow grease, and some quality materials – you’ll be able to achieve stunning results in no time!


Resurfacing your garage floor with concrete can be a great way to add value and function to your home. It is an inexpensive and relatively easy do-it-yourself project that can be done in just a few days. While it may not be as long lasting and durable as professionally installed concrete, it can still provide a good-looking and functional surface for years to come.

When selecting a concrete resurfacing product, make sure to choose one that is designed for the specific needs of your particular garage floor. Additionally, make sure to take all the necessary safety precautions during the installation process, such as wearing protective eyewear when using power tools and covering exposed skin while working with chemicals.

By taking the time to properly prepare the surface, select the right materials and follow step-by-step instructions, you can have a beautiful new garage floor in no time. With minimal effort and cost involved, do it yourself concrete resurfacing can be an excellent way for you to get more out of your garage space.

Leave a Comment