do it yourself bathtub peel and stick kit

Are you looking for an easy and cost-effective way to renovate your bathroom? The do it yourself bathtub peel and stick kit is the perfect solution! This kit provides you with everything you need to transform your bathtub from outdated to modern. It includes a peel and stick adhesive film that is designed to adhere to any existing surface, making it simple and quick for you to install. Plus, this kit comes with detailed instructions that make it easy for even a novice DIYer to create a stunning new look for their bathroom. Best of all, the do it yourself bathtub peel and stick kit is affordable, making it the perfect choice for anyone looking to give their bathroom a stylish upgrade without breaking the bank.1. Start by preparing the surface of your tub. Clean the area with a degreasing cleaner and remove any caulking, soap scum, and dirt. Be sure to dry the area completely before proceeding.

2. Measure the area you want to cover and cut a piece of the peel and stick kit that fits in that space. If needed, trim it down further for a perfect fit.

3. Peel off the backing from the kit and carefully place it on your tub surface, pressing firmly to secure it in place.

4. Use a rolling pin or other tool to press down firmly on the entire surface of the kit, making sure there are no air bubbles or gaps in coverage.

5. Allow at least 24 hours for the adhesion of the kit to take hold before using your tub or shower again.

Ease of Installation

Installing a bathtub peel and stick kit is quite simple and straightforward. All you need to do is simply peel off the back of the kit and press it onto the surface of your bathtub. It’s that easy. You don’t have to worry about complicated measurements or cutting into your bathtub, and it takes just minutes to install. Furthermore, you can install the kit yourself, eliminating the cost of hiring a professional for installation.


A Do It Yourself Bathtub Peel and Stick Kit is designed to be extremely durable and long-lasting, so you won’t have to worry about replacing it anytime soon. The adhesive is strong enough to stay in place for many years, even in wet conditions. The kits are also designed with a non-slip surface, providing extra safety and security in the bathroom.

Cost Effective

Using a Do It Yourself Bathtub Peel and Stick Kit is an economical alternative to replacing your entire bathtub. Instead of spending hundreds or thousands on a brand new tub, you can simply purchase an affordable kit that will provide you with comparable results. You’ll save money on materials as well as labor costs since you can install the kit yourself.

Variety of Looks

Do It Yourself Bathtub Peel and Stick Kits come in a variety of colors, patterns, textures, and styles so you can customize your bathroom without having to replace your entire tub. You can choose from classic white or black kits or select something more contemporary like marble or stone designs. With these kits, you can easily create a look that complements your existing décor.

Overall, using a Do It Yourself Bathtub Peel and Stick Kit is an easy way to update your bathroom at an affordable price. Not only are they easy to install, but they are also durable enough to last for many years while providing added safety features such as non-slip surfaces. Plus, with their variety of looks available, there’s something for everyone’s style preference!

Tools You Need

Installing a do it yourself bathtub peel and stick kit is a great way to update the look of your bathroom. Before you get started, you’ll need to make sure you have the right tools for the job. You’ll need a utility knife, measuring tape, caulking gun, level, and a drill with assorted drill bits. You may also want to have some painter’s tape on hand to protect any surfaces that may be affected by the installation process.

Step-by-Step Instructions

Once you have all the necessary tools ready, it’s time to start installation. Begin by measuring out the area where your bathtub peel and stick kit will be installed. Make sure that all measurements are precise so that your installation will go smoothly. Use painter’s tape to mark off the area where you plan on installing your kit. This will help keep everything in place while you work.

Next, use your utility knife to remove any existing caulking or sealant from around the bathtub or shower stall area. Apply new caulking around all edges of the tub or shower stall before you begin installing the peel and stick kit. Ensure that all edges of the tub are properly sealed before starting installation.

Now it’s time to start installing your bathtub peel and stick kit. Follow all instructions provided in the package for proper installation procedures. Be sure to apply each piece of material evenly and securely in order for it to adhere properly. Once all pieces of material are applied, use a level to make sure everything is even and correctly placed.

Finally, use a drill with assorted drill bits to securely attach any hardware pieces needed for proper installation of your new do it yourself bathtub peel and stick kit. Make any necessary adjustments with your level once again prior to completing installation. Once everything is finished, you’ll be able to enjoy an updated look for your bathroom!

Preparing the Area

Before installing a do it yourself bathtub peel and stick kit, it is important to prepare the area. Start by removing any existing fixtures, such as soap dishes, shower heads, or faucets. Once all fixtures have been removed, you will need to clean the surface of the bathtub with a mild cleanser and a sponge or cloth. This will ensure that there are no dirt or debris on the surface of the tub that could interfere with the installation process. After cleaning, you should use sandpaper to lightly roughen up the surface of the tub so that it is easier for the adhesive strips to adhere to it.

Applying Caulk

Once you have prepared the area, you can begin applying caulk around the edges of your bathtub and along any seams or joints in order to create a waterproof seal. Make sure that you use a high-quality caulk specifically designed for bathroom surfaces. Then, use a wet rag or sponge to smooth out any excess caulk and allow it to dry completely before moving on to the next step.

Installing Adhesive Strips

The next step in installing a do it yourself bathtub peel and stick kit is to apply adhesive strips around your tub’s perimeter. Make sure that each strip is applied uniformly and firmly against your tub’s surface in order for them to hold properly. Allow them time to fully adhere before proceeding with any further installation steps.

Adding Peel-and-Stick Panels

Once your adhesive strips are secure, you can begin adding your peel-and-stick panels around your bathtub’s perimeter. Start at one end of your tub and apply each panel one at a time in order for them to properly adhere along each edge of your bathtub’s surface. Make sure that each panel is applied firmly against your adhesive strips in order for them to hold securely in place over time.

Finishing Touches

Finally, once all of your panels have been installed correctly around your bathtub’s perimeter, you can add any finishing touches such as trim pieces around edges or corners if desired. This will help give your newly installed do it yourself bathtub peel and stick kit an even more polished look when complete!

Step 1: Pre-Installation

Before beginning the installation of a Do It Yourself bathtub peel and stick kit, it is important to prepare the area for installation. First, make sure that the surface of the bathtub is clean and free of debris. Use a mild cleaner or soap and water to scrub away any dirt or grime. Once the surface is clean, you may need to sand down any rough spots or imperfections before beginning the installation process. After prepping the area, you are ready to begin installing your kit.

Step 2: Read Instructions Carefully

The next step in installing a do it yourself bathtub peel and stick kit is to read the instructions carefully. The instructions will provide important information about how much material you will need and how long it will take to complete the installation. Make sure that you understand all of the steps before beginning so that there are no surprises along the way.

Step 3: Gather Materials

Once you have read through the instructions, it is time to gather all of your materials. Make sure that you have enough adhesive for your project as well as any tools or supplies needed for proper installation. If you are unsure about what supplies you need, consult with a local home improvement store or hardware store for assistance.

Step 4: Prepare Adhesive

Before application of your do it yourself bathtub peel and stick kit, make sure that your adhesive is properly prepared according to manufacturer instructions. This may involve mixing two parts together or heating them up in order for them to bond properly with each other. Always use safety precautions when handling chemicals or heated materials.

Step 5: Apply Adhesive

Once your adhesive is ready, it is time to apply it onto your bathtub surface using either a roller brush or trowel depending on what type of adhesive was used in this step. Make sure that an even layer of adhesive covers the entire surface before proceeding with application of material.

Step 6: Install Peel and Stick Kit

Now that your adhesive has been applied onto your bathtub surface, it is time to install your do it yourself peel and stick kit onto the prepared area. The kit should come with easy-to-follow instructions on how to apply each piece correctly so make sure that you follow those guidelines closely.

Safety Tips for Installing a Do It Yourself Bathtub Peel and Stick Kit

Installing a peel and stick bathtub kit is a great way to save money on your bathroom renovation project. But before you get started, it is important to remember that safety should always be a priority. Here are some tips to help you install your new bathtub with confidence:

1. Wear protective gear. As with any DIY project, it’s important to make sure you are wearing the proper safety gear. This includes eye protection, gloves, and protective clothing such as long pants and closed-toe shoes.

2. Prepare the area. Before beginning your installation, make sure the area is properly prepared. This includes clearing away any debris or objects that could interfere with the installation process and ensuring that the surface is clean and dry.

3. Read all instructions carefully. Before beginning your installation, make sure you thoroughly read through all of the instructions included in your kit to ensure you understand all of the steps involved in installing your new bathtub correctly.

4. Follow all safety precautions listed in the instructions. During your installation process, be sure to follow all of the safety precautions listed in the instructions included in your kit, such as making sure to keep yourself and others away from any electrical outlets or other power sources near your work area.

5. Check for any signs of damage before installation begins. Before beginning to install your new bathtub kit, be sure to check for any signs of damage or defects that could interfere with a successful installation process such as cracks or chips in the material or loose parts on the kit itself. If you find any signs of damage or defects, contact the manufacturer immediately for further instruction on how best to proceed with installation safely and correctly

By following these safety tips when installing a do-it-yourself bathtub peel and stick kit, you can have peace of mind knowing that you are taking all necessary precautions while completing this project successfully!

Preparing the Area

When you are installing a do it yourself bathtub peel and stick kit, it is important to first prepare the area correctly. Make sure that you clean the surface of the area where you will be sticking the kit with a damp cloth and remove any dirt, dust or other debris. You should also make sure that there are no holes or bumps in the surface that could interfere with your installation. If there are any, use a putty knife to fill them in before proceeding.

Measuring and Marking

The next step is to measure and mark the area for your kit installation. You should measure twice before cutting as this will help ensure that your cuts are straight and accurate. Once you have measured and marked your areas, use a straight edge and razor blade to cut out the appropriate sections for your kit.

Applying Adhesive

Once you have cut out your sections, it’s time to apply adhesive to the back of each piece of material in your kit. Make sure to spread it evenly across the entire surface using a notched trowel or other appropriate tool. Once all sections have been covered with adhesive, carefully place them onto the prepared surface one at a time.

Seam Sealing

Once all of your sections have been placed on the prepared surface, take some time to finish off any seams between pieces with an appropriate sealant or caulk. This will help ensure that no water gets through any cracks or gaps in between pieces while also helping to give your new bathtub peel and stick kit a finished look.

Finishing Up

Finally, make sure that all of your sections are properly secured by pressing down firmly on each piece for at least one minute after placing them on the surface. After this has been done, allow 24 hours for everything to completely dry before using any part of your new bathtub peel and stick kit.

Renovator’s Supply

Renovator’s Supply is one of the most popular brands when it comes to do it yourself bathtub peel and stick kits. They offer a wide range of products which includes everything you need to give your bathtub a makeover. From peel and stick tiles to wall decals, Renovator’s Supply has everything you need to spruce up your bathroom. Their products are easy to install and come with detailed instructions so that even a novice can easily do the job. Plus, their peel and stick tiles are available in various colors, patterns, and textures so that you can create a unique look for your bathroom.


Another popular brand of DIY bathtub peel and stick kits is StickPretty. They specialize in providing high-quality vinyl decals that are perfect for giving your bathtub an instant facelift. StickPretty offers a wide selection of stylish designs that are available in various sizes, shapes, and colors so that you can find the perfect look for your bathroom. Their products are easy to apply and feature intricate details that will give your bathtub a luxurious look without breaking the bank. Plus, they also offer a satisfaction guarantee on all their products so you can be sure they will last for years to come.


DryErasePaint is another great option when it comes to DIY bathtub peel and stick kits. Their products are designed with convenience in mind as they feature an innovative dry erase paint technology which makes them easy to apply as well as durable enough to last for years. Whether you want something subtle or something bold, DryErasePaint has got you covered with their wide selection of designs and colors. They also offer custom designs so you can get something truly unique for your space.


Do it yourself bathtub peel and stick kit makes it easier to give your bathroom a new look without the hassle of tearing out the old bathtub. The kit is easy to use, cost efficient, and gives you the flexibility to customize your bathroom design. It can also be used on other surfaces such as tiles, walls and countertops. With its wide range of colors, designs and textures available, you can create a unique look that will add value to your home.

Overall, the do it yourself bathtub peel and stick kit is an effective way to modernize any bathroom in no time. With minimal effort and cost, you can get a stunning makeover for your bathroom that will last for years to come.

Leave a Comment