Where is the best place to purchase a replacement iPhone 7 Plus screen?
How to Replace iPhone 7 Plus Screen: A Comprehensive Guide
Your iPhone 7 Plus is an essential tool for communication, entertainment, and work. When the screen breaks, everything comes to a standstill, and you need to address it as soon as possible. Instead of taking your phone to a repair shop, you can fix it yourself. This article provides a comprehensive step-by-step guide on how to replace iPhone 7 Plus screen.
The Things You Need
- Replacement screen
- P2 Pentalobe screwdriver
- Phillips screwdriver
- Suction cup
- Plastic pry tool
- Tweezers
- Electrical tape
- Hairdryer (optional)
Step-by-step Guide
Step 1: Switch off your iPhone
The first thing you need to do is switch off your iPhone to avoid any damage to the internal components. Hold down the power button and follow the instructions on the screen to power off the device.
Step 2: Remove the bottom screws
Use the P2 Pentalobe screwdriver to remove the two screws on the bottom of the iPhone 7 Plus. Note that these screws are different from the other screws on the phone.
Step 3: Remove the screen
Place the suction cup on the lower left side of the screen and gently pull it upwards to create a gap. Insert the plastic pry tool in the gap and slide it around the edges to loosen the adhesive. You can use a hairdryer to heat the edges for easier separation. Be careful not to damage the cables that connect the screen to the logic board.
Step 4: Disconnect the cables
When you have removed the screen, you will see three cables connecting it to the logic board. Use the Phillips screwdriver to remove the screws holding the metal panel covering the cables. Then, use a plastic pry tool to disconnect the cables, starting from the bottom then the middle and lastly the top, by prying them upwards. Be gentle to avoid damaging them.
Step 5: Remove the home button
The next step in our guide on how to replace iPhone 7 Plus screen is to remove the home button. You will need to detach it from the damaged screen and install it on your new replacement screen. Peel off any adhesive that remains on the button, and use a Phillips screwdriver to remove the screws and detach it from the old screen. Align it on your new screen and screw it in place with the screws you removed.
Step 6: Install the new screen
Align the new screen and reconnect the three cables in reverse order as you removed them. Replace the metal panel and screws that hold it in place. Then, align the screen with the body of the phone and press it firmly until it clicks into place. Finally, use the P2 Pentalobe screwdriver to replace the bottom screws.
Step 7: Switch on and test
Press the power button to switch on your iPhone and test the new screen. Check that all the features are working correctly, including the home button, the front camera, and the touch screen. If everything is okay, congratulations, you have successfully replaced your iPhone 7 Plus screen.
Conclusion
Replacing an iPhone 7 Plus screen is not difficult, but it requires patience and careful handling of the components. This guide on how to replace iPhone 7 Plus screen provides you with a comprehensive step-by-step approach that you can follow to fix your phone. By following these instructions, you can save money and time by fixing the phone yourself.
The iPhone 7 Plus is a popular and reliable model of the iconic Apple smartphone. However, disasters can and do happen, and one of the most common is a shattered touchscreen. Replacing an iPhone 7 Plus screen is a relatively straightforward and somewhat inexpensive task, but also one that should only be performed by someone with the right skills and tools.
To begin, you’ll need to purchase a quality replacement iPhone 7 Plus screen. There are plenty of affordable generic and original screens available from many places, such as eBay or Amazon. Once you have a suitable new screen, you’ll need to disassemble your device to access the existing screen. Make sure your device is powered down and all the cables are disconnected first.
The next step is to carefully undress the phone, removing all the components and unscrewing screws as required. By working slowly and precisely, you should be able to eventually remove the existing screen. Once this is done, the old screen can be carefully disconnected from the logic board and the new screen can be connected in its place. Be sure to make sure the cables are properly installed and secure before you press the new screen into place.
With the replacement screen now firmly in place, all you have to do is screw everything back together and carefully reassemble the phone. You’ll want to double check you haven’t left any screws out before powering back up and testing your new screen.
While replacing an iPhone 7 Plus screen is not too difficult a job for the experienced user, it can be dangerous and time consuming. If you don’t feel confident following these steps, then it’s best to take the phone to a qualified technician or repair shop to have the job done professionally. A professional fix may cost more money up-front, but it will be more reliable and ensure your phone looks and works like new again.