How long will the battery replacement process on the iPhone SE 2020 take?
How to Change iPhone SE 2020 Battery?
The iPhone SE 2020 is a compact and powerful smartphone that is popular for its affordability and performance. However, after prolonged use, the battery of the iPhone SE can deteriorate, causing it to drain quickly and possibly even fail to hold a charge.
If you’re dealing with a similar issue with your iPhone SE 2020, you might consider replacing its battery. Now, you don’t have to take your device to a technician and pay a high fee to change the battery. With a few simple steps, you can change the battery of your iPhone SE 2020 right at home.
Steps to Change iPhone SE 2020 Battery
Step 1: Check your iPhone SE 2020 Battery Health
The first thing you should do before changing the iPhone SE 2020 battery is to check the battery health. Go to Settings > Battery > Battery Health, to check the current percentage of your battery’s maximum capacity. If it’s less than 80%, then it’s time to replace your battery.
Step 2: Gather Necessary Tools and Components
You will require a few necessary components and tools to change the iPhone SE 2020 battery. Here’s what you need:
- Replacement battery that is compatible with the iPhone SE 2020
- Plastic spudger or pry tool
- Pentalobe screwdriver
- Suction cup
- Tweezers
Step 3: Power off iPhone SE 2020 and remove the SIM card tray
Turn off your iPhone SE 2020 before you start the process of changing its battery. Then remove the SIM card tray using a SIM eject tool. Set the tray and the eject tool aside for now.
Step 4: Remove the iPhone SE 2020 Display Assembly
Use a pentalobe screwdriver to remove the two screws at the bottom of the iPhone SE 2020 that hold the display assembly. Then use a suction cup and apply it to the bottom of the display, near the home button. After that, use light pressure to ensure it is attached securely.
Next, hold the back of the iPhone SE 2020 with one hand and pull up the suction cup with the other. As you lift the display assembly, use the plastic spudger or pry tool to gently pry the display away from the rear case.
Step 5: Disconnect the Battery from the Logic Board
Now you need to disconnect the battery from the logic board. Use a spudger tool to gently disconnect the battery connector, which is located on the top of the battery cable’s socket.
Step 6: Remove the iPhone SE 2020 Battery
After disconnecting the battery cable, use tweezers to remove the two battery adhesive strips from the iPhone SE 2020 battery. Slowly and gently pull the adhesive strips away from the battery and dispose of them properly.
Use your spudger or pry tool to gently pry the battery away from the adhesive that holds it securely to the rear case, and remove the battery from your iPhone SE 2020.
Step 7: Install the New iPhone SE 2020 Battery
Place the new iPhone SE 2020 battery into its position. Press down firmly to ensure that it is secured. Next, connect the new battery to the logic board, using the spudger tool to snap the battery connector back into its socket.
Step 8: Reassemble the iPhone SE 2020
Carefully reattach the display assembly, starting from the top and pushing it towards the bottom. Once it snaps into place, reattach the two screws that hold the display assembly.
Finally, reinsert the SIM card tray and turn your iPhone SE 2020 on. Check that the battery life is now longer and that it works correctly.
With just these simple steps, you have successfully replaced the battery of your iPhone SE 2020. It’s always best to purchase a new, high-quality battery to replace your old one, to ensure that it lasts longer and works better.
Remember always to dispose of the old battery properly, following the guidelines in your area. A malfunctioning battery is harmful to the environment, so always recycle it instead of throwing it away.